We have been building passive homes since 2012
At Kilduff Construction we have a proven track record in the construction of passive new build bespoke homes. We have been building passive homes since 2012 using a variety of systems including concrete block, concrete ICF and timber frame.

We build homes to the German Passivhaus standard which can be summarised as follows:
Thermal Insulation
All opaque building components of the exterior envelope of the house must be very well-insulated. For most cool-temperate climates, this means a heat transfer coefficient (U-value) of 0.15 W/(m²K) at the most, i.e. a maximum of 0.15 watts per degree of temperature difference and per square meter of exterior surface are lost.
Passive House Windows
The window frames must be well insulated and fitted with low-e glazing filled with argon or krypton to prevent heat transfer. For most cool-temperate climates, this means a U-value of 0.80 W/(m²K) or less, with g-values around 50% (g-value= total solar transmittance, proportion of the solar energy available for the room).
Ventilation Heat Recovery
Efficient heat recovery ventilation is key, allowing for a good indoor air quality and saving energy. In a Passive House, at least 75% of the heat from the exhaust air is transferred to the fresh air again by a heat exchanger.
Airtightness of The Building
Uncontrolled leakage through gaps must be smaller than 0.6 of the total house volume per hour during a pressure test at 50 Pascal (both pressurised and depressurised).
Absence of Thermal Bridges
All edges, corners, connections and penetrations must be planned and executed with great care, so that thermal bridges can be avoided. Thermal bridges which cannot be avoided must be minimised as far as possible.





















